Postfix et problème de reception de mail...

[Bacteries]

Bonjour,
j'ai depuis peu un serveur dédié chez sivit et je découvre par la même les joies de l'administration, pour le moment ça va pas trop de soucis mais je coince sur la réception de mes mails.

J'utilise postfix, et comme webmail j'ai squirremail; la création de compte c'est bon, l'envois de mail c'est bon mais impossible de recevoir de mail.

Donc pb de firewall, DNS, ...?
(cmt savoir si c'est ça et quoi faire pour corriger si y'a des erreurs?)

Une petite aide ne serait pas de refus

M'ci

[chantra]

quoi faire, regarder les logs!

se connecter en ssh, puis voir ce qui se passe dans:
/var/log/message
/var/log/mail.err
/var/log/mail.info

...
...

[MirageDemonAsh]

Edite le fichier /etc/mailname et entre l'adresse de ton serveur. Ensuite tu peux adapter le fichier main.cf de cette façon. Tu as juste besoin de remplacer le nom du serveur sd1159.sivit.org par celui de ton serveur et mailbox_size_limit qui est l'espace maxi autorisé pour un compte mail (100000000 octets soit 100 mo) (sauvegarde le fichier avant) :

#fichier main.cf
smtpd_banner = $myhostname ESMTP $mail_name (Service Mail de truc)
biff = no
append_dot_mydomain = no
myhostname = sd1159.sivit.org
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
mydestination = sd1159.sivit.org, localhost.sivit.org, , localhost
relayhost =
relay_domains =
mailbox_size_limit = 100000000
recipient_delimiter = +
inet_interfaces = all
mynetworks = 127.0.0.0/8
mailbox_command = procmail -a $EXTENSION
home_mailbox = Mailbox

Après modif, tu redémarres posfix (Pour comprendre le fonctionnement de posfix : http://x.guimard.free.fr/postfix/

Au pire tu peux reinstaller postfix et refaire la conf (une erreur peut être)

dpkg-reconfigure postfix

[Bacteries]

Merci Mirage,
j'ai regardé j'ai bien ça mais toujours pas de réception de mails

[MirageDemonAsh]

Avec quel nom de domaine essaies-tu d'envoyer et recevoir tes mails .

Je suppose que tu utilises un autre nom de domaine que sdxx12.sivit.org :
J'ai eu les mêmes problèmes au début en utilisant des comptes systèmes pour les mails et ça la résolu.
exemple :

si tu envoies et reçoies avec ex*emple.com alors essaie d'ajouter ce nom de domaine dans le fichier /etc/hostname

# /etc/hostname
sdxx12.sivit.org
ex*emple.com


Comme tu utilises la distribution des mails par un webmail installé sur ton serveur, la livraison se fait en local, donc ça ne vient pas de ton pare feu.

Parcontre si tu utilises un client de messagerie de chez toi alors il faut ouvrir en entrée sur ton serveur les ports 25 (smtp) et 143 (si tu utilises imap)

Si tout fonctionne :

Je te recommande ensuite cette lecture si tu es bon en anglais. Elle te permetra de monter un serveur de mail sécure et sans utiliser de compte système. C'est avec mysql que postfix va travailler pour la gestion des comptes mails :

http://workaround.org/articles/ispmail-sarge/


Une fois que ton serveur de mail est opérationnel tu peux le tester afin de voir si il interdit bien le relayage de mail par smtp. En clair, que personne ne puisse utiliser ton serveur smtp pour envoyer des mails si il n'a pas de compte sur ta machine. ça evite de mauvaise surprise.

Renseigne toi bien avant, par défaut posfix est très restrictif mais avoir des connaissances à ce sujet est un plus :

Plus d'infos <<

Derniere chose, si rien ne fonctionne il faut que tu demandes de l'aide sur le forum de sivit. Mais avant toute chose envoie un mail sur un de tes comptes et consulte aussitôt les fichiers logs comme dit chantra. C'est pour avoir une idée de ce qui merde, ensuite tu peux demander de l'aide sur sivit en indiquant les messages d'erreurs :

/var/log/mail.err
/var/log/mail.info
/var/log/mail.warn
/var/log/mail.log

[Bacteries]

Salut,
encore merci!

J'ai réussi à recevoir les mails, cette ligne :
mailbox_command = procmail -a $EXTENSION

posait problème. Mes mails arrivaient bien mais resté dans le spool (j'ai pas réussi à les récupérer d'ailleurs ), par contre j'ai toujours un problème pour l'envois en smtp...

Dur dur de tout apprendre d'un coup! Merci pr les conseils en tout cas.

[jegelskkerdeg]

voici mon probleme , je n'arive pas a recevoir les maile avec post fix , sur un reseaux lan tout vas bien .
le ox est bien configurer.
les configuration du nom de domaine est bien configurer chez ovh.
serveur mail linux, + postfix

voicil totu mes fichier
les fichier de configuraiton + les fichier de log et les manipulation realiser


dig mx fordev-studio.com d'un autre pc du réseau
; <<>> DiG 9.3.4-P1.1 <<>> mx fordev-studio.com
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 51790
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1

;; QUESTION SECTION:
;fordev-studio.com. IN MX

;; ANSWER SECTION:
fordev-studio.com. 86400 IN MX 1 mail.fordev-studio.com.

;; ADDITIONAL SECTION:
mail.fordev-studio.com. 86400 IN A 88.177.247.112

;; Query time: 27 msec
;; SERVER: 212.27.40.240#53(212.27.40.240)
;; WHEN: Thu Nov 26 12:09:13 2009
;; MSG SIZE rcvd: 72


mon fichier named.conf

// This is the primary configuration file for the BIND DNS server named.
//
// Please read /usr/share/doc/bind9/README.Debian.gz for information on the
// structure of BIND configuration files in Debian, *BEFORE* you customize
// this configuration file.
//
// If you are just adding zones, please do that in /etc/bind/named.conf.local

include "/etc/bind/named.conf.options";

// prime the server with knowledge of the root servers
zone "." {
type hint;
file "/etc/bind/db.root";
};

// be authoritative for the localhost forward and reverse zones, and for
// broadcast zones as per RFC 1912

zone "localhost" {
type master;
file "/etc/bind/db.local";
};

zone "127.in-addr.arpa" {
type master;
file "/etc/bind/db.127";
};

zone "0.in-addr.arpa" {
type master;
file "/etc/bind/db.0";
};

zone "255.in-addr.arpa" {
type master;
file "/etc/bind/db.255";
};

zone "fordev-studio.com" {
type master;
file "/etc/bind/fordev-studio.com";
};


zone "0.168.192.in-addr.arpa" {
type master;
file "/etc/bind/192.168.0";
};


include "/etc/bind/named.conf.local";

mon fichier zone fordev-studio.com
$ORIGIN fordev-studio.com.
$TTL 3D
@ IN SOA debian-fds.fordev-studio.com. root.fordev-studio.com. (3 36000 3600 360000 86400)

@ IN NS debian-fds.fordev-studio.com.
@ IN MX 1 mail.fordev-studio.com.

debian-fds A 192.168.0.16
mail A 192.168.0.16
www CNAME debian-fds
fixtouch A 192.168.0.20

mon fichier zone inverse
$TTL 3D
@ IN SOA debian-fds.fordev-studio.com. root.fordev-studio.com. (3 36000 3600 360000 86400)
@ IN NS debian-fds.fordev-studio.com.
@ IN MX 1 mail.fordev-studio.com.

16 PTR debian-fds.fordev-studio.com.
16 PTR http://www.fordev-studio.com.
16 PTR mail.fordev-studio.com.
20 PTR fixtouch.fordev-studio.com.

debian-fds:/home/tamir# named -g
26-Nov-2009 11:46:46.001 starting BIND 9.5.1-P3 -g
26-Nov-2009 11:46:46.001 found 2 CPUs, using 2 worker threads
26-Nov-2009 11:46:46.001 using up to 4096 sockets
26-Nov-2009 11:46:46.007 loading configuration from '/etc/bind/named.conf'
26-Nov-2009 11:46:46.008 max open files (1024) is smaller than max sockets (4096)
26-Nov-2009 11:46:46.008 using default UDP/IPv4 port range: [1024, 65535]
26-Nov-2009 11:46:46.008 using default UDP/IPv6 port range: [1024, 65535]
26-Nov-2009 11:46:46.010 listening on IPv6 interfaces, port 53
26-Nov-2009 11:46:46.011 binding TCP socket: address in use
26-Nov-2009 11:46:46.011 listening on IPv4 interface lo, 127.0.0.1#53
26-Nov-2009 11:46:46.011 binding TCP socket: address in use
26-Nov-2009 11:46:46.012 listening on IPv4 interface eth0, 192.168.0.16#53
26-Nov-2009 11:46:46.012 binding TCP socket: address in use
26-Nov-2009 11:46:46.015 automatic empty zone: 254.169.IN-ADDR.ARPA
26-Nov-2009 11:46:46.015 automatic empty zone: 2.0.192.IN-ADDR.ARPA
26-Nov-2009 11:46:46.015 automatic empty zone: 255.255.255.255.IN-ADDR.ARPA
26-Nov-2009 11:46:46.015 automatic empty zone: 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
26-Nov-2009 11:46:46.015 automatic empty zone: 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
26-Nov-2009 11:46:46.015 automatic empty zone: D.F.IP6.ARPA
26-Nov-2009 11:46:46.015 automatic empty zone: 8.E.F.IP6.ARPA
26-Nov-2009 11:46:46.015 automatic empty zone: 9.E.F.IP6.ARPA
26-Nov-2009 11:46:46.015 automatic empty zone: A.E.F.IP6.ARPA
26-Nov-2009 11:46:46.015 automatic empty zone: B.E.F.IP6.ARPA
26-Nov-2009 11:46:46.017 none:0: open: /etc/bind/rndc.key: permission denied
26-Nov-2009 11:46:46.017 couldn't add command channel 127.0.0.1#953: permission denied
26-Nov-2009 11:46:46.017 none:0: open: /etc/bind/rndc.key: permission denied
26-Nov-2009 11:46:46.017 couldn't add command channel ::1#953: permission denied
26-Nov-2009 11:46:46.017 ignoring config file logging statement due to -g option
26-Nov-2009 11:46:46.018 zone 0.in-addr.arpa/IN: loaded serial 1
26-Nov-2009 11:46:46.018 zone 127.in-addr.arpa/IN: loaded serial 1
26-Nov-2009 11:46:46.019 zone 0.168.192.in-addr.arpa/IN: loaded serial 3
26-Nov-2009 11:46:46.019 zone 255.in-addr.arpa/IN: loaded serial 1
26-Nov-2009 11:46:46.020 zone fordev-studio.com/IN: loaded serial 3
26-Nov-2009 11:46:46.020 zone localhost/IN: loaded serial 2
26-Nov-2009 11:46:46.021 running

mes fichier de configuration de postfix
main.cf

# See /usr/share/postfix/main.cf.dist for a commented, more complete version
#
#
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
# is /etc/mailname.
#myorigin = /etc/mailname
#
smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu)
biff = no
#
# appending .domain is the MUA's job.
append_dot_mydomain = no
#
# Uncomment the next line to generate "delayed mail" warnings
#delay_warning_time = 4h
#
# TLS parameters
smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
smtpd_use_tls=yes
smtpd_tls_session_cache_database = btree:${queue_directory}/smtpd_scache
smtp_tls_session_cache_database = btree:${queue_directory}/smtp_scache
#
# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
# information on enabling SSL in the smtp client.
#
myhostname = mail.fordev-studio.com
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
mydestination = fordev-studio.com, debian-fds.fordev-studio.com, localhost.fordev-studio.com, localhost
relayhost =
mynetworks = 127.0.0.0/8, 192.168.0.0/24, 88.177.247.112
#mailbox_command = procmail -a "$EXTENSION"
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all
home_mailbox = Maildir/


master.cf

#
# Postfix master process configuration file. For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ==========================================================================
smtp inet n - - - - smtpd
#submission inet n - - - - smtpd
# -o smtpd_tls_security_level=encrypt
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
# -o milter_macro_daemon_name=ORIGINATING
smtps inet n - n - - smtpd
# -o smtpd_tls_wrappermode=yes
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
# -o milter_macro_daemon_name=ORIGINATING
#628 inet n - - - - qmqpd
pickup fifo n - - 60 1 pickup
cleanup unix n - - - 0 cleanup
qmgr fifo n - n 300 1 qmgr
#qmgr fifo n - - 300 1 oqmgr
tlsmgr unix - - - 1000? 1 tlsmgr
rewrite unix - - - - - trivial-rewrite
bounce unix - - - - 0 bounce
defer unix - - - - 0 bounce
trace unix - - - - 0 bounce
verify unix - - - - 1 verify
flush unix n - - 1000? 0 flush
proxymap unix - - n - - proxymap
proxywrite unix - - n - 1 proxymap
smtp unix - - n - - smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay unix - - - - - smtp
-o smtp_fallback_relay=
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - - - - showq
error unix - - - - - error
retry unix - - - - - error
discard unix - - - - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - - - - lmtp
anvil unix - - - - 1 anvil
scache unix - - - - 1 scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent. See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# See the Postfix UUCP_README file for configuration details.
#
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix - n n - 2 pipe
flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman unix - n n - - pipe
flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
${nexthop} ${user}

ma configuration OVH


Champ Type Cible

.fordev-studio.com NS dns.ovh.net
.fordev-studio.com NS ns.ovh.net
.fordev-studio.com MX 1 mail.fordev-studio.com
.fordev-studio.com A 88.177.247.112
http://www.fordev-studio.com CNAME fordev-studio.com
mail.fordev-studio.com A 88.177.247.112


le probleme ne vient-il pas de soit du :
dnsdomainname dé que je je tape " hostname --fqdn "
j'obtien
debian-fds.fr

ou il peux venir aussi du fichier /etc/mailname
// /etc/mailname //
fordev-studio.com

ou cela pe venir de /etc/hosts

127.0.0.1 localhost
127.0.1.1 debian-fds.fr debian-fds
192.168.0.16 debian-fds.fr debian-fds
192.168.0.20 fixtouch.fr fixtouch

# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts


--

fichier log
/var/log/message
Dec 1 18:01:14 debian-fds kernel: [ 0.292018] PnPBIOS: Disabled by ACPI PNP
Dec 1 18:01:14 debian-fds kernel: [ 0.292018] PCI: Using ACPI for IRQ routing
Dec 1 18:01:14 debian-fds kernel: [ 0.296206] ACPI: RTC can wake from S4
Dec 1 18:01:14 debian-fds kernel: [ 0.300198] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.300209] system 00:08: ioport range 0x290-0x297 has been reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.300216] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.300220] system 00:09: ioport range 0x800-0x87f has been reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.300223] system 00:09: ioport range 0x480-0x4bf has been reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.300227] system 00:09: iomem range 0xffafe000-0xffb0cbff could not be reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.300230] system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.300233] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.300237] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.300240] system 00:09: iomem range 0xfff00000-0xfffffffe could not be reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.300248] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.300251] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.300260] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.300267] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.300270] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.300273] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.300277] system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] PCI: Bridge: 0000:00:01.0
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] IO window: a000-afff
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] MEM window: 0xfa800000-0xfe8fffff
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] PREFETCH window: 0x00000000bfe00000-0x00000000dfdfffff
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] PCI: Bridge: 0000:00:1c.0
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] IO window: disabled.
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] MEM window: disabled.
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] PREFETCH window: 0x00000000dfe00000-0x00000000dfefffff
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] PCI: Bridge: 0000:00:1c.3
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] IO window: b000-bfff
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] MEM window: 0xfe900000-0xfe9fffff
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] PREFETCH window: disabled.
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] PCI: Bridge: 0000:00:1e.0
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] IO window: disabled.
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] MEM window: 0xfea00000-0xfeafffff
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] PREFETCH window: disabled.
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
Dec 1 18:01:14 debian-fds kernel: [ 0.332030] NET: Registered protocol family 2
Dec 1 18:01:14 debian-fds kernel: [ 0.345496] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Dec 1 18:01:14 debian-fds kernel: [ 0.345731] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Dec 1 18:01:14 debian-fds kernel: [ 0.347623] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Dec 1 18:01:14 debian-fds kernel: [ 0.347786] TCP: Hash tables configured (established 131072 bind 65536)
Dec 1 18:01:14 debian-fds kernel: [ 0.347788] TCP reno registered
Dec 1 18:01:14 debian-fds kernel: [ 0.355130] NET: Registered protocol family 1
Dec 1 18:01:14 debian-fds kernel: [ 0.355243] checking if image is initramfs... it is
Dec 1 18:01:14 debian-fds kernel: [ 0.795277] Freeing initrd memory: 6069k freed
Dec 1 18:01:14 debian-fds kernel: [ 0.799278] audit: initializing netlink socket (disabled)
Dec 1 18:01:14 debian-fds kernel: [ 0.799278] type=2000 audit(1259690449.792:1): initialized
Dec 1 18:01:14 debian-fds kernel: [ 0.799278] highmem bounce pool size: 64 pages
Dec 1 18:01:14 debian-fds kernel: [ 0.799278] Total HugeTLB memory allocated, 0
Dec 1 18:01:14 debian-fds kernel: [ 0.799278] VFS: Disk quotas dquot_6.5.1
Dec 1 18:01:14 debian-fds kernel: [ 0.799278] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Dec 1 18:01:14 debian-fds kernel: [ 0.799278] msgmni has been set to 1750
Dec 1 18:01:14 debian-fds kernel: [ 0.799278] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Dec 1 18:01:14 debian-fds kernel: [ 0.799278] io scheduler noop registered
Dec 1 18:01:14 debian-fds kernel: [ 0.799278] io scheduler anticipatory registered
Dec 1 18:01:14 debian-fds kernel: [ 0.799278] io scheduler deadline registered
Dec 1 18:01:14 debian-fds kernel: [ 0.799278] io scheduler cfq registered (default)
Dec 1 18:01:14 debian-fds kernel: [ 0.799278] assign_interrupt_mode Found MSI capability
Dec 1 18:01:14 debian-fds kernel: [ 0.799278] assign_interrupt_mode Found MSI capability
Dec 1 18:01:14 debian-fds kernel: [ 0.799279] assign_interrupt_mode Found MSI capability
Dec 1 18:01:14 debian-fds kernel: [ 0.799279] isapnp: Scanning for PnP cards...
Dec 1 18:01:14 debian-fds kernel: [ 1.151170] isapnp: No Plug & Play device found
Dec 1 18:01:14 debian-fds kernel: [ 1.152224] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Dec 1 18:01:14 debian-fds kernel: [ 1.152328] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Dec 1 18:01:14 debian-fds kernel: [ 1.152686] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Dec 1 18:01:14 debian-fds kernel: [ 1.153934] brd: module loaded
Dec 1 18:01:14 debian-fds kernel: [ 1.154020] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Dec 1 18:01:14 debian-fds kernel: [ 1.155983] serio: i8042 KBD port at 0x60,0x64 irq 1
Dec 1 18:01:14 debian-fds kernel: [ 1.155987] serio: i8042 AUX port at 0x60,0x64 irq 12
Dec 1 18:01:14 debian-fds kernel: [ 1.157932] mice: PS/2 mouse device common for all mice
Dec 1 18:01:14 debian-fds kernel: [ 1.157932] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Dec 1 18:01:14 debian-fds kernel: [ 1.157932] rtc0: alarms up to one month, y3k
Dec 1 18:01:14 debian-fds kernel: [ 1.157932] cpuidle: using governor ladder
Dec 1 18:01:14 debian-fds kernel: [ 1.157932] cpuidle: using governor menu
Dec 1 18:01:14 debian-fds kernel: [ 1.157932] No iBFT detected.
Dec 1 18:01:14 debian-fds kernel: [ 1.157932] TCP cubic registered
Dec 1 18:01:14 debian-fds kernel: [ 1.157932] NET: Registered protocol family 17
Dec 1 18:01:14 debian-fds kernel: [ 1.157932] Using IPI No-Shortcut mode
Dec 1 18:01:14 debian-fds kernel: [ 1.157933] registered taskstats version 1
Dec 1 18:01:14 debian-fds kernel: [ 1.157933] rtc_cmos 00:03: setting system clock to 2009-12-01 18:00:50 UTC (1259690450)
Dec 1 18:01:14 debian-fds kernel: [ 1.157933] Freeing unused kernel memory: 244k freed
Dec 1 18:01:14 debian-fds kernel: [ 1.184494] input: AT Translated Set 2 keyboard as /class/input/input0
Dec 1 18:01:14 debian-fds kernel: [ 1.227171] ACPI Warning (tbutils-0217): Incorrect checksum in table [SSDT] - 34, should be 3B [20080321]
Dec 1 18:01:14 debian-fds kernel: [ 1.227171] ACPI: SSDT 7FFA8DE0, 02E3 (r1 AMI CPU1PM 1 INTL 20060113)
Dec 1 18:01:14 debian-fds kernel: [ 1.227171] ACPI: ACPI0007:00 is registered as cooling_device0
Dec 1 18:01:14 debian-fds kernel: [ 1.227171] ACPI: SSDT 7FFA90D0, 02DA (r1 AMI CPU2PM 1 INTL 20060113)
Dec 1 18:01:14 debian-fds kernel: [ 1.227171] ACPI: ACPI0007:01 is registered as cooling_device1
Dec 1 18:01:14 debian-fds kernel: [ 1.448105] usbcore: registered new interface driver usbfs
Dec 1 18:01:14 debian-fds kernel: [ 1.448105] usbcore: registered new interface driver hub
Dec 1 18:01:14 debian-fds kernel: [ 1.448105] usbcore: registered new device driver usb
Dec 1 18:01:14 debian-fds kernel: [ 1.456940] USB Universal Host Controller Interface driver v3.0
Dec 1 18:01:14 debian-fds kernel: [ 1.456940] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
Dec 1 18:01:14 debian-fds kernel: [ 1.456940] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Dec 1 18:01:14 debian-fds kernel: [ 1.456982] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Dec 1 18:01:14 debian-fds kernel: [ 1.457009] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00
Dec 1 18:01:14 debian-fds kernel: [ 1.457075] usb usb1: configuration #1 chosen from 1 choice
Dec 1 18:01:14 debian-fds kernel: [ 1.457098] hub 1-0:1.0: USB hub found
Dec 1 18:01:14 debian-fds kernel: [ 1.457104] hub 1-0:1.0: 2 ports detected
Dec 1 18:01:14 debian-fds kernel: [ 1.506949] Uniform Multi-Platform E-IDE driver
Dec 1 18:01:14 debian-fds kernel: [ 1.506954] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Dec 1 18:01:14 debian-fds kernel: [ 1.564016] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Dec 1 18:01:14 debian-fds kernel: [ 1.564019] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 1 18:01:14 debian-fds kernel: [ 1.564022] usb usb1: Product: UHCI Host Controller
Dec 1 18:01:14 debian-fds kernel: [ 1.564023] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
Dec 1 18:01:14 debian-fds kernel: [ 1.564025] usb usb1: SerialNumber: 0000:00:1a.0
Dec 1 18:01:14 debian-fds kernel: [ 1.565067] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
Dec 1 18:01:14 debian-fds kernel: [ 1.565079] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Dec 1 18:01:14 debian-fds kernel: [ 1.565099] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
Dec 1 18:01:14 debian-fds kernel: [ 1.565125] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e000
Dec 1 18:01:14 debian-fds kernel: [ 1.565184] usb usb2: configuration #1 chosen from 1 choice
Dec 1 18:01:14 debian-fds kernel: [ 1.565207] hub 2-0:1.0: USB hub found
Dec 1 18:01:14 debian-fds kernel: [ 1.565212] hub 2-0:1.0: 2 ports detected
Dec 1 18:01:14 debian-fds kernel: [ 1.565230] Floppy drive(s): fd0 is 1.44M
Dec 1 18:01:14 debian-fds kernel: [ 1.581309] FDC 0 is a post-1991 82077
Dec 1 18:01:14 debian-fds kernel: [ 1.668089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Dec 1 18:01:14 debian-fds kernel: [ 1.668093] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 1 18:01:14 debian-fds kernel: [ 1.668096] usb usb2: Product: UHCI Host Controller
Dec 1 18:01:14 debian-fds kernel: [ 1.668098] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
Dec 1 18:01:14 debian-fds kernel: [ 1.668101] usb usb2: SerialNumber: 0000:00:1a.1
Dec 1 18:01:14 debian-fds kernel: [ 1.668089] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
Dec 1 18:01:14 debian-fds kernel: [ 1.668089] ehci_hcd 0000:00:1a.7: EHCI Host Controller
Dec 1 18:01:14 debian-fds kernel: [ 1.668089] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
Dec 1 18:01:14 debian-fds kernel: [ 1.686452] ehci_hcd 0000:00:1a.7: debug port 1
Dec 1 18:01:14 debian-fds kernel: [ 1.686466] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebffc00
Dec 1 18:01:14 debian-fds kernel: [ 1.702247] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Dec 1 18:01:14 debian-fds kernel: [ 1.702251] usb usb3: configuration #1 chosen from 1 choice
Dec 1 18:01:14 debian-fds kernel: [ 1.702251] hub 3-0:1.0: USB hub found
Dec 1 18:01:14 debian-fds kernel: [ 1.702251] hub 3-0:1.0: 4 ports detected
Dec 1 18:01:14 debian-fds kernel: [ 1.806249] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
Dec 1 18:01:14 debian-fds kernel: [ 1.806249] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 1 18:01:14 debian-fds kernel: [ 1.806249] usb usb3: Product: EHCI Host Controller
Dec 1 18:01:14 debian-fds kernel: [ 1.806249] usb usb3: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
Dec 1 18:01:14 debian-fds kernel: [ 1.806249] usb usb3: SerialNumber: 0000:00:1a.7
Dec 1 18:01:14 debian-fds kernel: [ 1.806249] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
Dec 1 18:01:14 debian-fds kernel: [ 1.806249] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Dec 1 18:01:14 debian-fds kernel: [ 1.806249] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
Dec 1 18:01:14 debian-fds kernel: [ 1.806249] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
Dec 1 18:01:14 debian-fds kernel: [ 1.806249] usb usb4: configuration #1 chosen from 1 choice
Dec 1 18:01:14 debian-fds kernel: [ 1.806249] hub 4-0:1.0: USB hub found
Dec 1 18:01:14 debian-fds kernel: [ 1.806249] hub 4-0:1.0: 2 ports detected
Dec 1 18:01:14 debian-fds kernel: [ 1.909869] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Dec 1 18:01:14 debian-fds kernel: [ 1.909872] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 1 18:01:14 debian-fds kernel: [ 1.909875] usb usb4: Product: UHCI Host Controller
Dec 1 18:01:14 debian-fds kernel: [ 1.909877] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
Dec 1 18:01:14 debian-fds kernel: [ 1.909879] usb usb4: SerialNumber: 0000:00:1d.0
Dec 1 18:01:14 debian-fds kernel: [ 1.913762] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Dec 1 18:01:14 debian-fds kernel: [ 1.913762] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Dec 1 18:01:14 debian-fds kernel: [ 1.913762] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
Dec 1 18:01:14 debian-fds kernel: [ 1.913762] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
Dec 1 18:01:14 debian-fds kernel: [ 1.913762] usb usb5: configuration #1 chosen from 1 choice
Dec 1 18:01:14 debian-fds kernel: [ 1.913762] hub 5-0:1.0: USB hub found
Dec 1 18:01:14 debian-fds kernel: [ 1.913762] hub 5-0:1.0: 2 ports detected
Dec 1 18:01:14 debian-fds kernel: [ 2.037342] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Dec 1 18:01:14 debian-fds kernel: [ 2.037345] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 1 18:01:14 debian-fds kernel: [ 2.037348] usb usb5: Product: UHCI Host Controller
Dec 1 18:01:14 debian-fds kernel: [ 2.037350] usb usb5: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
Dec 1 18:01:14 debian-fds kernel: [ 2.037353] usb usb5: SerialNumber: 0000:00:1d.1
Dec 1 18:01:14 debian-fds kernel: [ 2.037752] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Dec 1 18:01:14 debian-fds kernel: [ 2.037752] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Dec 1 18:01:14 debian-fds kernel: [ 2.037752] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
Dec 1 18:01:14 debian-fds kernel: [ 2.037752] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
Dec 1 18:01:14 debian-fds kernel: [ 2.037752] usb usb6: configuration #1 chosen from 1 choice
Dec 1 18:01:14 debian-fds kernel: [ 2.037752] hub 6-0:1.0: USB hub found
Dec 1 18:01:14 debian-fds kernel: [ 2.037752] hub 6-0:1.0: 2 ports detected
Dec 1 18:01:14 debian-fds kernel: [ 2.141363] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Dec 1 18:01:14 debian-fds kernel: [ 2.141367] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 1 18:01:14 debian-fds kernel: [ 2.141369] usb usb6: Product: UHCI Host Controller
Dec 1 18:01:14 debian-fds kernel: [ 2.141372] usb usb6: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
Dec 1 18:01:14 debian-fds kernel: [ 2.141374] usb usb6: SerialNumber: 0000:00:1d.2
Dec 1 18:01:14 debian-fds kernel: [ 2.141276] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
Dec 1 18:01:14 debian-fds kernel: [ 2.141276] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Dec 1 18:01:14 debian-fds kernel: [ 2.141276] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
Dec 1 18:01:14 debian-fds kernel: [ 2.191454] ehci_hcd 0000:00:1d.7: debug port 1
Dec 1 18:01:14 debian-fds kernel: [ 2.191463] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800
Dec 1 18:01:14 debian-fds kernel: [ 2.207300] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Dec 1 18:01:14 debian-fds kernel: [ 2.207365] usb usb7: configuration #1 chosen from 1 choice
Dec 1 18:01:14 debian-fds kernel: [ 2.207395] hub 7-0:1.0: USB hub found
Dec 1 18:01:14 debian-fds kernel: [ 2.207402] hub 7-0:1.0: 6 ports detected
Dec 1 18:01:14 debian-fds kernel: [ 2.311333] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
Dec 1 18:01:14 debian-fds kernel: [ 2.311333] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 1 18:01:14 debian-fds kernel: [ 2.311333] usb usb7: Product: EHCI Host Controller
Dec 1 18:01:14 debian-fds kernel: [ 2.311333] usb usb7: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
Dec 1 18:01:14 debian-fds kernel: [ 2.311333] usb usb7: SerialNumber: 0000:00:1d.7
Dec 1 18:01:14 debian-fds kernel: [ 2.311333] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
Dec 1 18:01:14 debian-fds kernel: [ 2.311333] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
Dec 1 18:01:14 debian-fds kernel: [ 2.311333] eth0: RTL8168b/8111b at 0xf8818000, 00:18:f3:9d:f6:4f, XID 38000000 IRQ 220
Dec 1 18:01:14 debian-fds kernel: [ 2.339787] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 23 (level, low) -> IRQ 23
Dec 1 18:01:14 debian-fds kernel: [ 2.389962] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[23] MMIO=[feaff000-feaff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
Dec 1 18:01:14 debian-fds kernel: [ 2.402581] No dock devices found.
Dec 1 18:01:14 debian-fds kernel: [ 2.406584] SCSI subsystem initialized
Dec 1 18:01:14 debian-fds kernel: [ 2.417908] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
Dec 1 18:01:14 debian-fds kernel: [ 2.417912] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Dec 1 18:01:14 debian-fds kernel: [ 2.577662] scsi0 : ata_piix
Dec 1 18:01:14 debian-fds kernel: [ 2.577662] scsi1 : ata_piix
Dec 1 18:01:14 debian-fds kernel: [ 2.577662] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
Dec 1 18:01:14 debian-fds kernel: [ 2.577662] ata2: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
Dec 1 18:01:14 debian-fds kernel: [ 3.074596] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 1 18:01:14 debian-fds kernel: [ 3.082532] ata1.00: ATA-7: WDC WD2000JS-22NCB1, 10.02E02, max UDMA/133
Dec 1 18:01:14 debian-fds kernel: [ 3.082532] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
Dec 1 18:01:14 debian-fds kernel: [ 3.088601] ata1.00: configured for UDMA/133
Dec 1 18:01:14 debian-fds kernel: [ 3.420656] ata2: SATA link down (SStatus 0 SControl 300)
Dec 1 18:01:14 debian-fds kernel: [ 3.420640] scsi 0:0:0:0: Direct-Access ATA WDC WD2000JS-22N 10.0 PQ: 0 ANSI: 5
Dec 1 18:01:14 debian-fds kernel: [ 3.420640] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
Dec 1 18:01:14 debian-fds kernel: [ 3.420640] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
Dec 1 18:01:14 debian-fds kernel: [ 3.420640] scsi2 : ata_piix
Dec 1 18:01:14 debian-fds kernel: [ 3.420640] scsi3 : ata_piix
Dec 1 18:01:14 debian-fds kernel: [ 3.420640] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19
Dec 1 18:01:14 debian-fds kernel: [ 3.420640] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19
Dec 1 18:01:14 debian-fds kernel: [ 3.765559] ata3: SATA link down (SStatus 0 SControl 300)
Dec 1 18:01:14 debian-fds kernel: [ 4.104076] ata4: SATA link down (SStatus 0 SControl 300)
Dec 1 18:01:14 debian-fds kernel: [ 4.120020] Driver 'sd' needs updating - please use bus_type methods
Dec 1 18:01:14 debian-fds kernel: [ 4.120020] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
Dec 1 18:01:14 debian-fds kernel: [ 4.120020] sd 0:0:0:0: [sda] Write Protect is off
Dec 1 18:01:14 debian-fds kernel: [ 4.120020] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 1 18:01:14 debian-fds kernel: [ 4.120020] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
Dec 1 18:01:14 debian-fds kernel: [ 4.120020] sd 0:0:0:0: [sda] Write Protect is off
Dec 1 18:01:14 debian-fds kernel: [ 4.120020] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 1 18:01:14 debian-fds kernel: [ 4.120020] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
Dec 1 18:01:14 debian-fds kernel: [ 4.157550] sd 0:0:0:0: [sda] Attached SCSI disk
Dec 1 18:01:14 debian-fds kernel: [ 4.687439] PM: Starting manual resume from disk
Dec 1 18:01:14 debian-fds kernel: [ 4.707792] kjournald starting. Commit interval 5 seconds
Dec 1 18:01:14 debian-fds kernel: [ 4.707792] EXT3-fs: mounted filesystem with ordered data mode.
Dec 1 18:01:14 debian-fds kernel: [ 5.722634] udevd version 125 started
Dec 1 18:01:14 debian-fds kernel: [ 6.220814] Linux agpgart interface v0.103
Dec 1 18:01:14 debian-fds kernel: [ 6.281602] input: Power Button (FF) as /class/input/input1
Dec 1 18:01:14 debian-fds kernel: [ 6.333178] ACPI: Power Button (FF) [PWRF]
Dec 1 18:01:14 debian-fds kernel: [ 6.333268] input: Power Button (CM) as /class/input/input2
Dec 1 18:01:14 debian-fds kernel: [ 6.399485] ACPI: Power Button (CM) [PWRB]
Dec 1 18:01:14 debian-fds kernel: [ 7.039528] input: PC Speaker as /class/input/input3
Dec 1 18:01:14 debian-fds kernel: [ 7.119320] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
Dec 1 18:01:14 debian-fds kernel: [ 7.119320] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
Dec 1 18:01:14 debian-fds kernel: [ 7.284332] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
Dec 1 18:01:14 debian-fds kernel: [ 7.687503] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
Dec 1 18:01:14 debian-fds kernel: [ 7.691159] parport_pc 00:0a: reported by Plug and Play ACPI
Dec 1 18:01:14 debian-fds kernel: [ 7.691159] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
Dec 1 18:01:14 debian-fds kernel: [ 8.114298] Adding 2650684k swap on /dev/sda8. Priority:-1 extents:1 across:2650684k
Dec 1 18:01:14 debian-fds kernel: [ 8.365086] EXT3 FS on sda5, internal journal
Dec 1 18:01:14 debian-fds kernel: [ 8.701202] loop: module loaded
Dec 1 18:01:14 debian-fds kernel: [ 9.914717] kjournald starting. Commit interval 5 seconds
Dec 1 18:01:14 debian-fds kernel: [ 9.962899] EXT3 FS on sda10, internal journal
Dec 1 18:01:14 debian-fds kernel: [ 9.962905] EXT3-fs: mounted filesystem with ordered data mode.
Dec 1 18:01:14 debian-fds kernel: [ 9.981490] kjournald starting. Commit interval 5 seconds
Dec 1 18:01:14 debian-fds kernel: [ 9.981490] EXT3 FS on sda9, internal journal
Dec 1 18:01:14 debian-fds kernel: [ 9.981490] EXT3-fs: mounted filesystem with ordered data mode.
Dec 1 18:01:14 debian-fds kernel: [ 10.013489] kjournald starting. Commit interval 5 seconds
Dec 1 18:01:14 debian-fds kernel: [ 10.017470] EXT3 FS on sda6, internal journal
Dec 1 18:01:14 debian-fds kernel: [ 10.017470] EXT3-fs: mounted filesystem with ordered data mode.
Dec 1 18:01:14 debian-fds kernel: [ 10.017470] kjournald starting. Commit interval 5 seconds
Dec 1 18:01:14 debian-fds kernel: [ 10.025510] EXT3 FS on sda7, internal journal
Dec 1 18:01:14 debian-fds kernel: [ 10.025510] EXT3-fs: mounted filesystem with ordered data mode.
Dec 1 18:01:14 debian-fds kernel: [ 11.589739] NET: Registered protocol family 10
Dec 1 18:01:14 debian-fds kernel: [ 11.589739] lo: Disabled Privacy Extensions
Dec 1 18:01:14 debian-fds kernel: [ 11.642637] r8169: eth0: link up
Dec 1 18:01:14 debian-fds kernel: [ 11.642643] r8169: eth0: link up
Dec 1 18:01:14 debian-fds rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="2272" x-info="http://www.rsyslog.com"] restart
Dec 1 18:01:19 debian-fds kernel: [ 30.395499] lp0: using parport0 (interrupt-driven).
Dec 1 18:01:19 debian-fds kernel: [ 30.535126] ppdev: user-space parallel port driver
Dec 1 18:01:20 debian-fds kernel: [ 31.376482] RPC: Registered udp transport module.
Dec 1 18:01:20 debian-fds kernel: [ 31.376486] RPC: Registered tcp transport module.
Dec 1 18:01:20 debian-fds kernel: [ 31.479696] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Dec 1 18:01:20 debian-fds kernel: [ 31.574724] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Dec 1 18:01:20 debian-fds kernel: [ 31.590724] NFSD: starting 90-second grace period
Dec 1 18:01:22 debian-fds dhcdbd: Started up.
Dec 1 18:01:25 debian-fds dhcpd: Internet Systems Consortium DHCP Server V3.1.1
Dec 1 18:01:25 debian-fds dhcpd: Copyright 2004-2008 Internet Systems Consortium.
Dec 1 18:01:25 debian-fds dhcpd: All rights reserved.
Dec 1 18:01:25 debian-fds dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Dec 1 18:01:25 debian-fds dhcpd: Internet Systems Consortium DHCP Server V3.1.1
Dec 1 18:01:25 debian-fds dhcpd: Copyright 2004-2008 Internet Systems Consortium.
Dec 1 18:01:25 debian-fds dhcpd: All rights reserved.
Dec 1 18:01:25 debian-fds dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Dec 1 18:01:25 debian-fds dhcpd: Wrote 0 leases to leases file.
Dec 1 18:01:25 debian-fds dhcpd:
Dec 1 18:01:30 debian-fds kernel: [ 42.532326] NET: Registered protocol family 5
Dec 1 18:02:14 debian-fds papd[3118]: restart (2.0.3)
Dec 1 18:02:14 debian-fds papd[3118]: CUPS support enabled (1.3)
Dec 1 18:02:14 debian-fds kernel: [ 90.476991] warning: `proftpd' uses 32-bit capabilities (legacy support in use)